1m x 58cm DTF Complete Sheet 1m print

1m x 58cm Ready To Upload Sheet

Each meter sheet is 58cm x 100cm.

Ordering 2 meters means you get a full 58cm x 200cm on Hot peel film. More surface area then 1sq meter.

If you require a template to use in photoshop to make your sheets, send me an email and ill send you one. luke@anarchyprintandapparel.com.au

Our DTF prints come powdered and cured ready for you to press. 

Shadows and fades without a background can not be printed

Please keep line work that does not have a background like writing above 4 pixels wide.

Cotton Shirts

1. Set heat press between 145 degs C.

2. First press the shirt for 5 seconds to remove moisture.

3. Place the film on the shirt in the position you want it.

4. Press the film with Medium to heavy pressure for 8 seconds at 145 degs C.

5. This film is instant hot peel. Once the press opens peel the film off (but keep it low to the shirt) in a fast smooth motion.

6. Then re press the shirt with baking paper or a telfon sheet over the image for 8 seconds with medium pressure.

Then you're done.

Cotton Hoodies

1. Set heat press between 155 degs C.

2. First press the shirt for 5 seconds to remove moisture.

3. Place the film on the shirt in the position you want it.

4. Press the film with Medium to heavy pressure for 8 seconds at 155 degs C.

5. This film is instant hot peel. Once the press opens peel the film off (but keep it low to the shirt) in a fast smooth motion.

6. Then re press the shirt with baking paper or a telfon sheet over the image for 8 seconds with medium pressure.

Then you're done.

Polyester Shirts

1. Set heat press between 130 degs C.

2. First press the shirt for 5 seconds to remove moisture.

3. Place the film on the shirt in the position you want it.

4. Press the film with Medium to heavy pressure for 8 seconds at 130 degs C.

5. This film is instant hot peel. Once the press opens peel the film off (but keep it low to the shirt) in a fast smooth motion.

6. Then re press the shirt with baking paper or a telfon sheet over the image for 8 seconds with medium pressure.

Then you're done.

Stubby Holders

1. Set heat press to 120 degs C.

2. First press the Stubby holder for 4 seconds.

3. Place the Print on the stubby holder in the position you want it.

4. Press the print with Medium pressure for 8 seconds at 120 degs C.

5. This film is instant hot peel. So as soon as the press opens peel the film off in a fast smooth motion.

6. Then re press the Stubby holder with baking paper or a telfon sheet over the print for 6 seconds.

Then you're done.

                  Washing Instructions
 

Wash Inside Out, No More Than 40°C

DO NOT TUMBLE DRY

Do Not Iron Directly onto The Print

Its recommended

- Waiting 24 hours after pressing, before washing.

- Use of fabric softeners or chemicals can damage the print and can dull the colours.

- For best results when air-drying your garments, leave them inside out from the washing machine until dry this avoids any UV damage if drying In direct sunlight.