2m x 58cm DTF Complete Sheet 2m print

2m x 58cm Ready To Upload Sheet

Each meter sheet is 58cm x 200cm.

Ordering 2 meters means you get a full 58cm x 200cm on Hot peel film. More surface area then 1sq meter.

If you require a template to use in photoshop to make your sheets, send me an email and ill send you one. luke@anarchyprintandapparel.com.au

Our DTF prints come powdered and cured ready for you to press. 

Shadows and fades without a background can not be printed

Please keep line work that does not have a background like writing above 6 pixels wide.

Cotton

1. Set heat press between 140 - 150 degs C.

2. First press the shirt for 5 seconds to remove moisture.

3. Place the film on the shirt in the position you want it.

4. Press the film with Medium to heavy pressure for 12 seconds at 140 - 150 degs C.

5. This film is instant hot peel. So as soon as the press opens peel the film off (but keep it low to the shirt) in a fast smooth motion.

6. Then re press the shirt with baking paper or a telfon sheet over the image for 5 - 10 seconds with medium pressure.

Then you're done.

      Polyester

1. Set heat press to 135-145 degs C.

2. First press the shirt for 2 seconds.

3. Place the film on the shirt in the position you want it.

4. Press the film with Medium pressure for 12 seconds at 135 -145 degs C.

5. This film is instant hot peel. So as soon as the press opens peel the film off (but keep it low to the shirt) in a fast smooth motion.

6. Then re press the shirt with baking paper or a telfon sheet over the image for 5 seconds with medium pressure.

Then you're done.

      Stubby Holders

1. Set heat press to 120 degs C.

2. First press the Stubby holder for 4 seconds.

3. Place the Print on the stubby holder in the position you want it.

4. Press the print with Medium pressure for 8 seconds at 120 degs C.

5. This film is instant hot peel. So as soon as the press opens peel the film off in a fast smooth motion.

6. Then re press the Stubby holder with baking paper or a telfon sheet over the print for 6 seconds.

Then you're done.

                  Washing Instructions
 

Wash Inside Out, No More Than 40°C

DO NOT TUMBLE DRY

Do Not Iron Directly onto The Print

Its recommended

- Waiting 24 hours after pressing, before washing.

- Use of fabric softeners or chemicals can damage the print and can dull the colours.

- For best results when air-drying your garments, leave them inside out from the washing machine until dry this avoids any UV damage if drying In direct sunlight.